Troubleshooting your Spa

Posted by

If you are experiencing a problem with your spa, before you call Customer Service, you may be able to resolve it yourself by following these troubleshooting steps.

There are many problems spa owners can identify and resolve themselves. This troubleshooting guide will help you with many common problems and may save you a service call. We don’t expect spa owners to be technicians, so everything contained in this guide is non-technical and does not involve tools. You will never be asked to do something that will void your warranty. You may not be able to resolve every problem your spa may have. When that happens, you will be advised to call for service.

warning.gif

If your spa is under warranty, you must have all service performed by a qualified spa service tech or you will void your warranty.

Before you make repairs to your spa, check that it’s still under warranty. If it is, and it’s a part that’s covered by the warranty, you should call your spa dealer to schedule service. Some parts are not covered under the warranty, particularly wearable parts such as jet inserts and lights. For more information on what parts are covered by the warranty, refer to the spa warranties page on this site.

Message on the control panel

A message on the control panel may indicate a problem.

Note: The message troubleshooting shown here applies to Cal Spa control panels built in 2013 and earlier. Beginning with the 2014 product line, Cal Spa control panels display different message codes. For a description of these message codes, see the owner’s manual.

Problems starting up

Note: The priming procedure described here applies to Cal Spas built in 2013 and earlier. Beginning with the 2014 product line, Cal Spas pumps have a different method of priming. See the 2014 owner’s manual for a full description.

Power and electrical problems

Note: The priming procedure described here applies to Cal Spas built in 2013 and earlier. Beginning with the 2014 product line, Cal Spas pumps have a different method of priming. See the 2014 owner’s manual for a full description.

Heat problems

Jet problems

Water pressure problems

Pump problems

Air stream problems

Water quality problems

Leave a Reply

Your email address will not be published.